Workable Solutions | Step-by-step Troubleshooting |
---|---|
Fix 1. Ethernet Cable | Step 1. Connect two PCs to the same network; Step 2. Turn on the sharing option on both PCs...Full steps |
Fix 2. Qiling Disk Master | Step 1. Open Qiling Disk Master on both of your computers. Choose "PC to PC" to go to the next step...Full steps |
Transferring files from one PC to another can be done through various methods, including using a USB flash drive, external hard drive, cloud storage service, email, WiFi, or an Ethernet cable. Specifically, using an Ethernet cable or LAN cable is a viable option for migrating files between two computers.
Transferring files from one PC to another using an Ethernet cable is a fast and efficient method, especially when a network is not available. To do this, follow these steps: [insert steps here].
We also show you a workaround to transfer files, programs, user account, and settings using an easy PC data transfer tool if using Ethernet doesn't meet your needs.
To establish a connection between two PCs using an Ethernet cable to transfer files, start by ensuring both devices have an Ethernet port and a compatible cable. Next, connect the cable to the Ethernet port on each PC, making sure to secure it firmly to prevent disconnections.
1. Connect both PCs with an Ethernet cable or a LAN cable. Both PCs use the same port and do the same thing. The cable is plugged into the Ethernet port on one PC and the other end is plugged into the Ethernet port on the other PC.
2. To view the active network or Ethernet, right-click the Start button and select "Control Panel > Network and Sharing Center".
3. To access the Ethernet properties, go to "Ethernet" and click on "Properties". Then, navigate to "Internet Protocol Version 4 (TCP/IPv4)" and click on "Properties".
4. Select "Use the following IP address" and enter the specific IP address and subnet mask shown in the screenshot, ensuring they are in the same range, not necessarily the example's values.
Put the following value on 1st PC
Put the following value on the 2nd PC
5. After assigning the IP addresses successfully, you will see the two computer names in the Network settings.
1. To access advanced sharing settings, go to the "Control Panel", then click on "Network and Internet", followed by "Network and Sharing Center", and finally click on "Change advanced sharing settings".
2. Choose these options and click "Save changes".
3. Click "Turn off password protected sharing" to access shared files from another computer without needing to enter a password, but remember to turn it back on after the file transfer is complete.
1. To share a file or folder, select it, right-click and choose "Share with > specific people".
2. To share a file, go to the File Sharing window, click the drop-down menu, select "Everyone", then "Add" and "Share" to transfer the file to another PC, where it can be accessed on the target PC.
3. To access shared files, open File Explorer by pressing Win + E, click on Network on the left-hand panel, find the source PC, and double-click it to view all shared files, which can then be copied and pasted to the destination.
Transferring files from PC to PC using an Ethernet cable can be a bit complicated, especially for beginners, and only allows for the sharing of one file or folder at a time. This method can become impractical when dealing with a large number of files that need to be transferred quickly. Fortunately, there is an alternative method that can make file transfer more efficient.
If you need to transfer large or all files from one PC to another, you'll want a reliable and free PC file transfer program. Qiling Disk Master Free is an ultimate solution that fulfills all your PC data transfer needs, providing one-stop solutions for PC upgrading.
Qiling Disk Master Free provides comprehensive PC data transfer solutions.
Download this free PC file transfer software to easily copy documents and files between PCs using WiFi.
Step 1.Open Qiling Disk Master on both of your computers and choose "File sync" to proceed.
Step 2. Connect two PCs via the network by entering the password or verification code of the target PC, ensuring the correct transfer direction, and clicking "Connect" to proceed.
The verification code is located on the top right corner of the main screen on the target computer under the "PC to PC" option.
Step 3. To transfer files, select "Files" and choose the specific files you want to transfer, and you can also customize the storage path for the transferred data by clicking the Edit icon.
Step 4. You can transfer files from one PC to another using the built-in feature in Windows 10. To do this, click on the "Start" button and select "File Explorer". Then, click on "This PC" and select the files you want to transfer. Right-click on the selected files and choose "Send to" > "Another location".
Transferring files from one PC to another using an Ethernet cable involves a series of steps that can be a bit tedious and complex. However, by carefully following the guidelines outlined above, you can successfully transfer files between the two PCs. The process may take some time, but it's a reliable method for sharing files over a wired network.
To transfer batches of files or programs simultaneously between two PCs, we recommend using Qiling Disk Master, which allows for file migration between computers with or without a network.