How to Fix "There was a problem resetting your PC" Error in Windows 10
Quick Navigation:
- PART I: Possible Causes for the Error "There was a problem resetting your PC"
- PART II: 3 Ways to Fix the Problem of "There was a problem resetting your PC"
- 1. Run System File Checker to Repair corrupted system Files
- 2. Rename system and Software Registry with Command Prompt
- 3. Revert to previous windows version with window restore points
- PART III: Preventing Data loss while fixing "There was a problem resetting your PC"
- Step 1. Select the file type you want to restore
- Step 2. Select a location to scan or find data
- Step 3. Recover the Lost file
Resetting a Windows 10 PC is a vital function in eliminating malicious hardware and system bugs. In some instances, this function fails, displaying an error message, "There was a problem resetting your PC". This same message may be displayed differently as "There was a problem resetting your PC surface Pro" or "there was a problem resetting your pc Windows 10 no change were made" and may be used interchangeably as done below. However, this is the same problem and this article will help you put an end to the bug.
PART I: Possible Causes for the Error "There was a problem resetting your PC"
The error message "There was a problem resetting your PC" can be frustrating, especially when you're trying to reset your Windows 10 device. This error can occur due to various reasons, such as:
- The "There was a problem resetting your PC" error can be caused by a system disk with bad sectors. Bad sectors are areas on the hard drive that are not functioning properly, which can lead to data corruption, file system errors, and other issues.
- You're starting with a clean slate, with the pre-installed Windows 10 version on your PC. This means you don't have any legacy issues from Windows 7 or Windows 8 to worry about.
- You're experiencing problems with your Windows Recovery Environment (WinRE), which is a critical component of the Windows operating system. The WinRE is designed to provide a safe and reliable way to troubleshoot and repair your Windows installation.
- You use the "Create a recovery drive" feature in windows 10 to create the USB recovery drive.
- The manufacturer enabled compression to reduce the disk space required for pre-installed programs.
- The PC was booted by going through the following steps: Troubleshoot > Reset this PC > Remove everything.
PART II: 3 Ways to Fix the Problem of "There was a problem resetting your PC"
If you're encountering the "There is a problem resetting your PC" error on Windows 10, don't worry! This issue can be caused by a variety of factors, and we'll walk you through a step-by-step guide to help you troubleshoot and resolve the problem.
1. Run System File Checker to Repair corrupted system Files
The System File Checker (SFC) is a built-in utility in Windows 10 that can help identify and fix corrupted system files. If the "There is a problem resetting your PC" error is caused by corrupted system files, running the SFC can help resolve the issue.
- a. Locate Command prompt in your PC using the search function and run as administrator by right-clicking on the result obtained. If asked for a password, insert your local password.
- b. Upon opening of the command window, type sfc/scannow and press the enter key on your PC to start the scanning process.
- After the SFC scan is complete, restart your PC to ensure the changes take effect.
2. Rename system and Software Registry with Command Prompt
The Registry Editor (Regedit) is a powerful tool that can be used to edit the Windows registry. This can be useful in resolving issues like the "There was a problem resetting your PC surface pro 6" error.
- a. Locate Command prompt in your pc using search function and run as administrator.
- b. Enter the command below.
- c. Then close the Command prompt which would take you to the Windows Recovery Environment Screen.
- d. Finally choose the continue option to boot your pc and after reboot, "There was a problem resetting your PC surface pro 6" will have been solved.
Type in cd %windir%\system32\config and press enter key,
Then ren system system.001 and press enter key,
And finally ren software software.001 then press enter key.
3. Revert to previous windows version with window restore points
Windows Restore Points is a built-in Windows feature that allows you to restore your PC to a previous state when it was working fine. This method is safe and doesn't delete any files, but it only works if you have a restore point created before the issue occurred.
- a. Using the search function, locate System Restore and choose the create a restore point option from results.
- b. Then the System Properties windows will be opened where you will switch to System Protection tab.
- c. Finally Click on the System restore button. As it opens the System restore window, click on Next.
- d. Choose a point you want to revert to, and click on Next.
- e. On-screen instructions should simply be followed to complete the process. Upon completion, try resetting your PC.
If you're experiencing the "There was a problem resetting your PC" issue in Windows 10, don't worry! Using one of the following methods, you should be able to resolve the problem.
PART III: Preventing Data loss while fixing "There was a problem resetting your PC"
If you've encountered the "There was a problem resetting your PC" error and lost vital data in the process, don't worry! Data recovery is possible, and you can use a deep data recovery tool to retrieve your lost files.
Are you facing the "There was a problem resetting this PC" error and worried about losing your vital data? Don't panic! Deep Data Recovery is a powerful tool that can help you recover your lost data with ease.
Step 1. Select the file type you want to restore
Deep Data Recovery is a powerful tool that can help you recover lost data from various devices and storages. When you launch the app, all file systems are selected by default. However, if you need to recover a specific file type, such as photos, you can unselect the other file types.
Step 2. Select a location to scan or find data
You can select locations such as hard drive, system partition (for special loss data locations), and external storage (Yeah it can be used also to recover data from external storage like USB keys). Once selected, the program scans the location, entirely searches for the lost data, and lists out what it searches.
Step 3. Recover the Lost file
After a completed quick scan, the upper part of the window displays the scan result and the guide to "deep scan" for more data. Preview the listed files and if some files are still not found after a quick scan, you can use the deep scan as it will scan every sector and find more data. As deep scanning entails scanning more files, it will require more time as compared to a quick scan. After performing a quick scan, you may now find all lost data.
The process is as easy as that, do not go around searching for data recovery software anymore as this can do the trick for any problem involving data recovery on PC. It also has a free trial plan so that you can get a feel of what working with the best software entails; feel free to check it out.
Related Articles
- 5 Ways for How to Fix Files on Desktop Disappeared in Windows 10/8/7
- 7 Ways to Fix Windows 10 Keeps Freezing Up Randomly [2020]
- How to Fix 0x80240fff Windows 10 Update Error
- How to Convert GPT to MBR without Operating System (No Data Loss)
How to convert GPT to MBR without operating system? Here you can convert GPT disk to MBR disk without data loss having no access to an OS. - How to Copy Dell Recovery Partition in Windows 11/10/8/7
For people wondering how to copy Dell recovery partition to another hard drive or USB, this post provides 3 methods to do it with built-in feature or Qiling Disk Master. - How to Erase SSD before Selling Completely and Securely?
Learn how to erase SSD before selling securely and completely so that you can sell your SSD to the next one without worrying about privacy leakage.