Ext4 is the evolution of the most used Linux file system-Ext3. In many ways, Ext4 is a deeper improvement over Ext3 than Ext3 was over Ext2. Ext3 was mostly about adding journaling to Ext2, but Ext4 modifies important data structures of the filesystem such as the ones destined to store the file data. The result is a filesystem with an improved design, better performance, reliability, and features. (Quoted from ArchWiki - https://wiki.archlinux.org/title/ext4)
Ext 4 ensures that file system metadata is correctly written and ordered on your storage device. When write caches lose power, your disk goes with a performance cost, especially for applications. You are faced with Ext4 devices in these scenarios:
In a word, the Ext4 file system is widely used when you are using Network Attached Storage or when you are running Linux. Most users complained that NAS data get lost due to accidental deleting, formatting, and Ext4 file system errors. To solve the problems and get back to Ext4 data, this post provides you with two solutions in detail.
No matter you are using QNAP, Synology, Western Digital, NETGEAR, etc, the file system of the device is Ext4. And there are times that you may delete files from NAS or format them when you are trying to upgrade it to a bigger one. How can you get back data from your NAS Ext4 drives? Qiling RAID recovery software can help.
This hard disk data recovery software can recover both the files you just accidentally deleted and the files which have been removed a long time ago. It's also capable of restoring corrupted files and can read and recover the information located on an inaccessible drive. It saves your deleted or damaged data and comes with several useful features.
The Advantages of Qiling NAS Data Recovery
Qiling NAS data recovery provides a real-time recovery at any time without NAS server interruption. Follow the steps below to recover Ext4 data from NAS.
Step 1. Select a NAS server and start recovering.
Download and install Deep Data Recovery on your Windows 11/10 64-bit computer. When you open this software, select "NAS Recovery". All the NAS servers will be automatically listed, choose your target NAS device and click "Scan".
Step 2. Enable SSH service on the NAS server.
Go to "Control Panel > Terminal & SNMP" to check the "Enable SSH service" box. Then view and remember the port for remote access open Deep Data Recovery and click "Next".
Step 3. Connect to the NAS server remotely.
This software will detect your IP and Port automatically. All you need to do is input the user name and password. If the IP address or Port is not right, you can correct it manually. Then, click "Connect Now".
Step 4. Recover lost/deleted NAS data
Then, Qiling data recovery software will connect to your NAS and start a NAS device scanning. After the scan, you will see all the deleted, lost, or existing files on your NAS server.
You can apply the "Filter" feature or click the "Search files or folders" option to find the lost files on the hard drive. Select wanted NAS files that you lost on the server and click "Recover" to save them to another location.
Click the "Recover" button to restore deleted BitLocker files in Windows 10.
What if you have data loss from Ext4, Ext3, and Ext2 Linux partitions because of accidental deletion or other operations? The easiest way to recover data from Ext4, Ext3, and Ext2 Linux partitions in Windows 11/10/8/7 is using good data recovery software. There are lots of data recovery software available in the market, but most of these tools don't support the Ext4 file system, making Ext4 data recovery impossible with such software.
While Qiling data recovery software can meet your needs to retrieve Linux Ext4 data on a Windows computer. To recover data from Ext4, Ext3, & Ext2 Linux Partition on Windows With Qiling, you need to do the following things:
Step 1. Run Deep Data Recovery. Choose file types and click "Next" to start.
Step 2. Select the partition where stored the lost files and click "Scan". Qiling data recovery software supports parition recovery with FAT(FAT12,FAT16,FAT32), exFAT, NTFS, NTFS5, ext2, ext3, HFS+, and ReFS file system.
Step 3. If you want to quickly find the lost data from the numerous scan results, you can use the filter or search function.
Step 4. You can preview files before recovery. Then, select all desired data and click "Recover" to restore files from existing partitions. Do not save the files to the partition where you lost the data.
You can access and recover Linux Ext4 data on a Windows computer easily if you have a fast and reliable data recovery tool. Linux has built-in support for Windows NTFS partitions, so the Windows operating system can not directly read the Linux partition. Thus, the data recovery software is a must-have tool for you. If you still have problems, you can turn to a manual RAID recovery service.
Consult with Qiling data recovery experts for one-on-one manual recovery service. We could offer the following services after FREE diagnosis. Our decades-experienced engineers are knowledgeable and can repair the damaged RAID structure and restore data from all RAID levels.