Don't worry if you can't format SD card on phone, camera, or Windows PC. On this page, you'll learn why you can't format SD card, how to fix this error, and successfully format SD card on your devices.
SD card, as a type of memory card in portable electronic devices, is widely used on Android phones, tablets, cameras, and some media players. The SD card also works as extended storage for you to save or back up files. To make use of a brand new SD card or set SD card for some specific usage, you'll need to format the SD card.
However, sometimes, due to some unknown errors, you may not be able to format the SD card. Check out the reasons why you can't format the SD card and learn how to fix this issue from the following parts.
To help you fully resolve the SD card cannot format issues, it's a wise choice to get to know the reasons behind this error. Usually, reasons for can't format SD card error on different devices are dissimilar.
Check the exact causes of why you can't format an SD card on your phone, camera, or computer:
On an Android phone:
On a camera:
On a PC:
So how do I fix an SD card that won't format or SD card cannot format? This is what we're going to discuss and you are also suggested to take the tips as follows:
1. Pick Up a Proper Way
As the ways to fix SD card cannot format error are distinctive, we suggest you take the specific fixes that apply to your situation:
2. Back Up Essential SD Card Files in Advance
In order to avoid unnecessary file loss issue, and if you can still access the SD card, please back up all vital data from the SD card to another secure location.
If your SD card is inaccessible, don't worry. You can first fix this error with the suggested method as presented in the next 3 parts and then turn to reliable data recovery software such as Deep Data Recovery to restore your valuable SD card files.
When you can't format SD card on an Android phone, you can first try the steps to make it work again:
Step 1. Remove and reconnect the SD card to your phone.
Step 2. Restart the Android phone and go to Settings.
Step 3. Tap "Storage", locate the SD card, and tap on "Mount SD Card".
Step 4. Then tap on "Format SD Card" to start formatting it on your phone.
If it doesn't work, move the SD card, connect it to your PC via an SD card reader, and format it on your PC.
After this, insert the SD card back and restart your phone, you should be able to use the card as extended storage to save music, photos, and other data by now.
Also Read: SD Won't Mount on Android or PC
Note that if the presented method doesn't work, it's highly possible that the SD card is corrupted or has an unsupported file system. You need to take the card out of your phone and connect it to a computer. Then turn to the fixes in Part 3 for help.
Mostly, when you are unable to format the SD card, you can remove and reinsert the card. And reformat the SD card again. Here are the steps to fix SD card can't format issue on your Camera:
Step 1. Take the SD card out of your camera.
Step 2. Unlock the SD card by changing its switch.
Step 3. Replace a new SD card if it's damaged.
Step 4. Insert SD card to the camera, restart it and go to Settings.
Step 5. Select SD card and select "Format Card", click "OK"
Wait for the formatting to finish. If you still can't format it, move the card and connect it to your PC, format it on your computer instead. If you can't format the SD card on your computer, refer to the fixes in the next part to resolve this error with ease.
When you can't format SD card on Windows PC or mobile phone, camera, it's probably that your card is containing internal errors, such as file system corruption, write-protected, unsupported file system, etc.
Here we collected * methods that you can try them one by one to fix this error and format your SD card successfully:
Mostly, when you see Windows warning that it was unable to complete the format on your SD card, the first thing we suggest you do is to check if the SD card is write-protected.
Check SD Card
Step 1. Connect SD card to PC and open File Explorer.
Step 2. Check if the SD card:
Remove Write Protection with DiskPart Command
Step 1. Connect SD card to PC.
Step 2. Press Windows + R, type cmd and hit Enter.
Step 3. Type the command lines below and hit Enter each time:
Step 4. Type exit to close DiskPart when the process completes.
Write Protection Removal Tool
If you don't consider yourself a pro-computer user and you're not familiar with command-lines, don't worry. There are graphical-based solutions to help you remove write-protection from your hard drives, USB drives, and even SD cards.
Qiling CleanGenius is one of these tools that helps you fix aforementioned issues on your drives without knowing a thing about command-line.
Here's an easy-to-follow guide on how to use this tool to get your issues sorted:
Step 1: DOWNLOAD and install Qiling CleanGenius (free) on your computer.
Step 2: Run Qiling CleanGenius on your PC, select Optimization and choose the Write Protection mode.
Step 3: Select the device that is write-protected and click Disable to remove the protection.
Note: If your SD card is locked by encryption software or it's encrypted by BitLocker, see also: How to Remove Write Protection from SD Card.
As listed in the causes at the beginning of this page, bad sectors, invalid or corrupted file systems, etc., can lead to SD cards cannot format error.
The best way is to check and repair internal SD card errors with the CHKDSK command:
Step 1. Insert SD card to your PC.
Step 2. Press Windows + X keys and select "Command Prompt (Admin)".
Step 3. Type CHKDSK F: /f /r hit Enter.
(Replace F with the drive letter of your SD card.)
Usually, it will spend 3-4 hours. Wait for the process to complete and then all bad sectors and the corrupted file systems will be fixed by this command.
Now that you can retry to use Disk Management to format the SD card to a supported file system like FAT32 or NTFS on your computer again:
Step 1. Connect the SD card to your computer.
Step 2. Press Windows + R keys and type diskmgmt.msc and hit Enter.
Step 3. On Disk Management, right-click on SD card, and choose "Format Volume...".
Step 4. Reset the file system on your SD card into FAT32 or NTFS and click OK to confirm.
You May Also Like:
As we know, that sometimes, when the SD card is inaccessible, you'll have to format it first. As a result, data loss is inevitable.
In this case, you'll need to recover data after formatting the SD card. The sooner you take action, the better chance you have for SD card format recovery.
You have two options: 1. Use SD Card Recovery Software; 2. Customize Data Recovery Service.
Option 1. Use SD Card File Recovery Software
Turning to a reliable SD card file recovery software is a wise choice. Here, you can try Deep Data Recovery that enables you to fully restore all missing and hidden files from inaccessible SD card, USB, or even external hard drive with a few simple clicks.
Just download and install it on your PC and try to recover data with the guide here.
Step 1. Connect the SD card, memory card, or CF Card to your computer and launch Qiling memory card recovery software on your PC. Select file types and click "Next" to start.
Step 2. The SD card will be listed under the Devices section. Choose the SD card and click "Scan" to start looking for your lost data.
Step 3. The software will start a scan automatically. The scan is powerful enough to find all lost files that even lost file names. After the scanning process, you can find deleted items from the tree-view panel on the left. Then, click "Filter" if you are looking for a specific file type, like photos, documents, videos or emails.
Step 4. You can directly double-click the files to preview the content. After this, you can choose wanted files and click "Recover" to restore them to a secure location on your PC or other external storage devices.
Option 2. Customize Data Recovery Service
Consult with Qiling Data Recovery Experts for one-on-one manual recovery service. We could offer the following services after FREE diagnosis
On this page, we explained why can't an SD card be formatted and the complete process of fixing the "Can't format SD card" error on your phone, camera, or computer.
Note that if your SD card is accessible, don't forget to back up all important files first. Otherwise, you'll need to turn to data recovery software like Deep Data Recovery for help after formatting the SD card.
If you have a further question related to SD card can't format, don't worry. Check the questions and answers here. You may find a satisfying answer.
1. Why can't I format my SD card as internal storage?
To turn to an SD card as internal storage, you must check if the card is blank. If your SD card is not blank, it must be the reason why you can't format it as internal storage.
Follow the steps here for help:
2. How do I fix a corrupted SD card?
When your SD Card is corrupted, turn to the steps here for a quick fix:
3. Can't format/erase SD card on Mac, Help!
According to most Mac users, Disk Utility can't format or erase SD card due to some reasons. Here are some practical fixes that you can try: