How to Fix 'USB Says/Shows No Media in Disk Management' Error
If you're experiencing the "USB shows No Media in Disk Management" error on your computer, this guide can help. The issue can be resolved by following the methods outlined below, which will allow your storage devices to appear and work normally with your Windows computer without losing any data. Simply follow these steps to fix the problem.
USB shows no media in Disk Management
You can try to resolve the issue by checking the USB drive for physical damage, using a different USB port, and checking the drive's file system for errors. If none of these steps resolve the issue, you may need to reformat the USB drive using Disk Management or a third-party tool. If the drive is still not recognized, it may be faulty and need to be replaced. You can also try using a USB drive recovery tool to see if it can recover any data from the drive.
"I'd be happy to help you resolve the recognition issue with your SanDisk USB pen drive in Windows 10 Disk Management. Can you try restarting your computer and then plugging in the drive again? If that doesn't work, try checking the drive's file system and formatting it if necessary. If you're still having trouble, please let me know and I'll provide further assistance to retrieve your important photos."
The "No Media" error occurs when a removable disk is defined as a no media disk, causing Windows to not recognize it and display the "There is no disk in the drive" error in File Explorer, with DiskPart showing "No Media 0 Bytes". This issue can be caused by various reasons, requiring patience while troubleshooting.
Quick Fix: Change USB port to see if the USB shows normal in Disk Management
When the USB flash drive shows as no media in Disk Management, try changing the USB port and reconnecting it to your PC from a different USB port.
1. Unplug the USB from your computer properly.
2. To resolve the issue where your USB flash drive is not recognized by your PC, try plugging it into a different USB port on your computer. This can sometimes resolve connectivity issues and allow your PC to recognize the flash drive.
3. The Disk Management tool in Windows can detect a USB flash drive as a normal removable disk, allowing you to check if it's being recognized by the system. This can be done by opening the Disk Management tool, selecting the USB drive from the list of available disks, and verifying that it's listed as a removable disk.
If the front USB ports didn't solve the problem, it might be due to an insufficient power supply. Try connecting the USB drive to the rear USB port on the computer's motherboard, where the power supply is much higher.
If the USB still says no media in Disk Management, follow the comprehensive fixes below to resolve your problem. These fixes include checking for BIOS updates, running a System File Checker, running a DISM scan, and checking for corrupted system files.
Complete Fixes for the 'USB Show No Media in Disk Management' Error
Follow the four steps below to fix your problem:
#1 - Export/Extract Useful Media Files from the USB Drive That Shows No Media in Disk Management
To thoroughly scan and find all media files and data on a USB flash drive, we recommend using Qiling free data recovery software. This tool specializes in restoring lost, hidden, and permanently removed files from Windows PC hard drives, external hard drives, USB, and other devices in just a few clicks.
Step 1. Select file types and click "Next" to start.
Connect a USB drive or pen drive to your computer and launch Qiling USB data recovery software. Select the desired file types and click "Next" to initiate the recovery process.
Step 2. Select USB/pen drive to scan and find lost files
Select the external drive labeled as "External drives" and click "Scan" to initiate a search for lost files.
Step 3. Scan and Search Lost Files on a USB Drive
Deep Data Recovery thoroughly scans a USB flash drive/pen drive to find lost data, and then uses a filter feature to find specific wanted files.
Step 4. Restore All Lost Files from USB
A double-Click will allow you to preview the files. Select the target files to restore and click "Recover" to save them to a secure location on your PC or other external storage devices.
You May Also Like:
#2 - Find Entries of Disconnected Devices in Device Manager and Reconnect the USB to the PC
1. Find entries of disconnected devices in Device Manager
For Windows 10/8 users:
- Click Start and search for Device Manager, then select Device Manager from the search results.
- To view hidden devices in Device Manager, click on View and select Show Hidden Devices. This will expand all entries, allowing you to see all devices, including those that are not normally visible.
- Locate the greyed out devices and right-click on them, select Uninstall.
- Restart your PC.
For Windows 7 users:
- Click Start and type: cmd, hit Enter.
- Type: set devmgr_show_nonpresent_devices=1 and hit Enter.
- Type: cd\ and hit Enter.
- Type: cd windows\system32 and hit Enter.
- Type: start devmgmt.msc and hit Enter.
- To view hidden devices, click on View and select Show hidden devices. Then, expand all entries and double-click on them.
- Locate all greyed-1. Go to the Start menu.
- Restart your PC.
2. Reconnect USB to PC
After finding entries of all disconnected devices in Device Manager, restart your PC and try to reconnect the USB to your PC again. If the USB still doesn't show up, check if it appears in Disk Management. If not, proceed to the next solution.
#3 - Enable USB in Device Manager
1. Right-click the Windows icon and select Device Manager.
2. To locate your USB flash drive, look under the "Universal Serial Bus Controller" category in the Device Manager, where it will be listed with the name "USB Mass Storage".
3. To fix the issue where an icon is disabled, right-click on the icon and select "Enable" if it's marked with a red mark or an arrow mark.
4. If the drive is already marked as enabled, you won't see the Enable option. In this case, the drive has already been activated and is ready for use.
To verify that the disk drives are enabled, you can continue checking the Disk Drives in Device Manager to ensure that all drives are enabled as well.
#4 - Change the USB Drive Letter and Run CHKDSK to Repair USB Errors
1. Change USB drive letter
- Right-click on Computer, select manage, and enter Disk Management.
- Right-You need to click on the USB flash drive which shows no media there and select Change Drive Letter and Paths, then click on Remove and click on Yes to confirm the removal of the drive letter.
- To change the drive letter of a USB flash drive that says "No media" on your PC, go to "This PC" or "Computer" and right-click on the drive. Select "Change" and then choose "Assign the following drive letter:" to set a new drive letter to the drive.
- Click OK to confirm the operation.
2. Run CHKDSK to repair USB errors
- Right-click on the Windows icon and select Command Prompt (Admin).
- To sign in as administrator, click yes when prompted to do so, and then sign in using your administrator account.
- To run the Check Disk utility on a USB flash drive, open Command Prompt as an administrator, type `chkdsk E: /f /r /x`, replacing E: with the drive letter of your USB flash drive, and press Enter. This command will scan the drive for errors, fix any that it finds, and then attempt to recover any readable information from the drive if it's unable to fix the errors. The /f option tells Check Disk to fix any errors it finds, the /r option tells it to run a thorough scan of the drive, and the /x option tells it to force the drive to be dismounted before scanning, which can be helpful if the drive is in use or if the scan is taking a long time.
Qiling CleanGenius is a user-Meet a user-friendly computer fixing tool that's both safe and lightweight, making it a perfect alternative to the CHKDSK command. With just one click, this tool can easily fix damaged file systems, providing a hassle-free solution for computer users.
Step 1. DOWNLOAD Qiling CleanGenius on your computer and complete the installation.
Step 2. Run the software. Click "Optimization", and then choose "File Showing" .
Step 3. Select the drive with a corrupted file system. Tick the "Check and fix file system error" option and click "Execute".
Step 4. Wait the tool performs the repairing task. After that, click the "here" button to check the drive.
1. Connect the drive to your PC.
Conclusion
The USB no media error in Disk Management can be resolved using various troubleshooting methods, including connecting the flash drive to a new USB port, the computer's motherboard USB port, or uninstalling and reinstalling the drive in Device Manager. Additionally, changing the drive letter or repairing USB errors may also resolve the issue. However, physical damage to the flash drive can also cause malfunctions, so it's essential to consider this possibility when troubleshooting.
If you've tried all the troubleshooting methods on this page and your problem persists, you may want to explore other tutorials for potential solutions. For instance, you could check out a guide on how to repair a faulty USB stick.
People Also Ask About USB No Media Error
If you have other concerns related to USB shows no media error, check out the questions and answers section below to find an answer to your concern.
1. Why does my USB say no media?
The term "No Media" refers to a situation where the flash memory controller can't communicate with the NAND flash memory on the drive, making it appear as an empty disk drive to the computer, typically due to NAND flash failure.
I'm happy to help you with that! However, I don't see a previous conversation or context about the USB issue.
2. How do I fix no media USB?
If your USB drive is showing a "No Media" error, there are several possible solutions. You can try formatting the drive using a computer, which will erase all data on the drive, or using a formatting tool like Disk Utility or a third-party software.
- Try your USB in another port
- Error-checking tool to fix USB no media
- Update Your media drivers
- To fix the issue of "there is no media in the device", you can try uninstalling the device driver. This can be done by going to the Device Manager, finding the device in question, right-clicking on it, and selecting "Uninstall device".
- To fix the "no media" error on your removable disk, you can try changing the letter assigned to it. This can often resolve the issue.
- If you found the format option on your Pendrive or memory card, do it. This will erase all data on the device, so make sure you have backed up any important files before proceeding.
- Running chkdsk to fix the "no media in the specified device" error is not the correct solution. Chkdsk is used to check and fix disk errors, not to resolve issues related to removable storage devices.
- Rebuilt MBR Partition using third party tool
- Using attrib command to fix no media USB
- Delete partition and create a new partition using disk management
For a step-If you're experiencing issues with your Windows 10 update, we recommend trying the Quick Fix and 4 Complete Fixes on this page. To do this, simply revert back to these tutorials and follow the step-by-step guides provided.
3. How do I open a flash drive that is not recognized?
Step 1. Connect the USB flash drive to the PC
Step 2. Navigate to "Control Panel" > "System" > "Device Manager" > "Disk drivers".
Step 3. Uninstall the USB device, then scan for hardware changes to refresh the drivers.
Step 4. Restart your computer.
For more details, please refer to how to Fix USB Flash Drive Not Recognized or Detected.
Related Articles
- SD Card Recovery Software Free Download Full Version with Crack
- Fixed: USB/External Hard Drive Shows in Device Manager Not This PC
- Fix and Restore External Hard Drive Shows Only 32GB to Full Capacity
- Fix 'This Drive Is Read Only' on SD Card/USB/Hard Drive [5 Methods]